Jay's Audio - CD players and DAC

The CDT3-MK3 is the flagship top-loader CD transport.

Equipped with Philips CDPRO2 LF, proprietary tuned by Jay's Audio chief, Jay Ho.
The CDPRO2 module is mounted to massive aluminium plate which are in turn affixed with damped mountings for complete mechanical isolation.

In digital audio, the quality of the crystal plays a big part in the audio quality. CDT3-MK3 is equipped with low noise, low phase noise, low jitter, ultra precision Oven Controlled Crystal Oscillator. The residual jitter at <1ps is undetectable with the test equipment on the market.

CDT3 can be synchronized with downstream equipment (DAC) via its 10MHz clock I/O. With external clock connected, it bypasses the internal OCXO, the CDT3 is slaved to the Master Clock.

Tremendous amount of effort has been paid to vibration control. Milled high grade aluminum chassis, coupled with milled internal vibration control aluminum structure, the CDT3 is built like a tank that spins the silver Redbook CD. (Redbook CD transport only. Doesn't support HDCD/SACD/DSD)

Specifications:

• Jay's Audio Tuned CDPRO2-LF Mechanism
• Schurter IEC Inlet
• Improved Noise Filter with 110v/230v switching
• Talema Encapsulated Transformers
• Multistage Super Regulator with Boutique Grade Caps
• Isolated AC Power Supply at the bottom
• Tuned AC EMI filters
• Special Soundcare vibration damping feet
• Neutrik XLR
• Oven Controlled Crystal Oscillator OCXO
• i2s LVDS Output
• Digital Output Isolation Transformer
• Native/Upsampling 44.1kHz / 176.4kHz configurable via Toggle Switch
• Digital Outputs:
• • COAX (RCA/BNC) 2v @ 75ohm
  • AES/EBU 5V @110ohm
  • I2S Output: HDMI i2s LVDS, RJ45 i2s LVCMOS
• Clock-Output: 10MHz / 5 V p-p / 75 Ω
• Clock-Input: 10MHz / 0.3 – 5 V p-p / 50 to 75 Ω
• AC Power: 110V/230V, 50-60Hz
• Dimension (W*H*D): 450mm x 150mm x 380mm
• Weight: 22KG

The CDT2-MK3 is a high end CD transport. It is based on the legendary Philips CDM4 mechanism and is therefore ideal for enthusiasts with a CD collection who want to enjoy it in the best possible way for years to come.
Only the best components are used, such as Noratel encapsulated transformers, Crystek Femto clock and Neutrik connectors.
This CD transport has captured many audiophile hearts and has a price/quality ratio that cannot be beat.
An external DAC is required.

The improvements compared to the very successful MK2 version are:

• Even better clock (OCXO) for even less jitter and an even better sound
• NOS / Upsampling (44.1kHz or 176.4kHz) switchable via remote control
• Dimmable display
• Improved noise filter

 Specifications:

• Philips CDM4 mechanism
• Can be controlled with controls on the front, remote controller
• Outputs: COAX (RCA and BNC), 2V/75Ohm, XLR 5V/110Ohm, HDMI I2S LVDS.
• Size(W*H*D): 430mm * 120mm * 380mm
• Weight: 15kg
• Click here for a review of this model: 6moons.com
• Click here for another review of this model: Hifi-Advice.com
• Click here for the next review: Alpha-Audio.nl (translated from Dutch)

The DAC-2 MK3 R-2R is a high end DAC. It is the perfect partner for the CDT2-MKIII CD transport. The DAC has been developed and fine-tuned for multiple years. Only the best components and smartest technologies are used. A lot of attention has gone to minimizing jitter and distortion of the signal. All this has resulted in a versatile and fantastic sounding DAC.

 Some features:

• Unique AC filter, specially tuned for the DAC-2 MK3
• High end Soekris dam1941-12 R-2R DAC module with Jay's Audio tuned Discrete Analog Output Stage.
• Selectable NOS (non-oversampling) / OS (oversampling) mode with different filters
• Supports up to DSD256 and PCM384 via the I2S input, DSD128/PCM384 via the USB input en PCM192kHz via the other inputs
• Four encapsulated Talema transformers for independently feeding the control, digital and analog sections
• Boutique grade high quality components were used for sound tuning / voicing
• Pure DAC or preamp mode

Specifications:

• Digital Inputs: USB, Optical, COAX (RCA and BNC), XLR and HDMI I2S LVDS.
• Analog Outputs: RCA (1.9V RMS) and XLR (3.8V RMS)
• Size (W*H*D): 430mm * 120mm * 380mm
• Weigt: 15kg

The SW-10 is a network switch designed for the most critical audiophiles who seek refinement in Digital Music Streaming.

It is an High quality 8-ports Network Switch and based on a Cisco 8-Port Business Desktop Gigabit Switch.

The chassis of SW-10 is milled out of an Aluminium Block. There are three compartments in chassis to segregate the AC mains, DC regulators, and the Ethernet Switch main board.

 Some features:

• Based on Csico 8 port business Desktop Gigabit switch
• 2 x SFP (mini-GBIC) Gigabit ports (optical)
• CNC Aluminium Block Chassis
• AC Noise Filter
• High quality components like: encapsulated Talema transformer, Phillips 1% Precision Resistors, High Endurance reservoir Caps
• OCXO clock (Over Controller Crystal Oscillator) with ultra low noise PLL circuitry (like in the OCK-2 clock)
• 10Mhz Master Clock In-/Output (Sine/Square wave BNC input, Square wave BNC output)

Specifications:

• Ports: 8 Gigabit Ethernet (10/100/1000) Ports
• Network standards: IEEE 802.3, 802.3u, 802.3x, 802.3ab, 802.3az
• Size (W*H*D): 307mm * 60mm * 257mm
• Weight: 4kg

The SW-6 is a network switch designed for the most critical audiophiles who seek refinement in Digital Music Streaming.

It is an High quality 6-ports Network Switch.

The chassis of SW-6 is milled out of an Aluminum Block. There are three compartments in chassis to segregate the AC mains, DC regulators, and the Ethernet Switch main board.

 Some features:

• 1 x SFP (mini-GBIC) Gigabit ports (optical)
• 4 Gigabit RJ45 ethernet ports + 1 isolated Gibabit RJ45 ethernet port with special isolated transformer design recommended for your backbone network (such as routers, network bridges) and audio processing equipment (streamers)
• CNC Aluminium Block Chassis
• AC Noise Filter
• High quality components like: encapsulated Talema transformer, Phillips 1% Precision Resistors, High Endurance reservoir Caps
• OCXO clock (Over Controller Crystal Oscillator) with ultra low noise PLL circuitry
• 10Mhz Master Clock In (BNC input 50Ohm)

Specifications:

• Ports: 4 Gigabit Ethernet (10/100/1000) Ports + 1 isolated Gigabit RJ45 port
• Network standards: IEEE 802.3, 802.3u, 802.3x, 802.3ab, 802.3az
• Size (W*H*D): 240mm * 50mm * 175mm
• Weight: 2kg

The SW-8 is a network switch designed for critical audiophiles who seek refinement in Digital Music Streaming.

It is an High quality 8-ports Network Switch and based on the Linksys LGS108 8-Port Business Desktop Gigabit Switch.

The chassis of SW-8 is milled out of an Aluminium Block. There are three(3) compartments in chassis to segregate the AC mains, DC regulators, and the Ethernet Switch main board.

 Some features:

• Based on Linksys LGS108 8 port business Desktop Gigabit switch
• CNC Aluminium Block Chassis
• AC Noise Filter
• High quality components like: encapsulated Talema transformer, Phillips 1% Precision Resistors, High Endurance reservoir Caps
• OCXO clock (Over Controller Crystal Oscillator) with ultra low noise PLL circuitry

Specifications:

• Ports: 8 Gigabit Ethernet (10/100/1000) Ports
• Network standards: IEEE 802.3, 802.3u, 802.3x, 802.3ab, 802.3az
• Size (W*H*D): 240mm * 50mm * 175mm
• Weight: 2kg

The OCK-2  is a 10MHz Master Clock Generator equipped with OCXO (Oven Controlled Crystal Oscillator) powered by Ultra-Low-Noise Linear Power Supply.

It is highly precise, accurate and far superior compared to traditional SPXO Femto Clocks. Output Freq is 10.000000MHz (<-115 dBc@1Hz).
It is equiped with siz (6) sets of Buffered Clock Outputs at the rear panel. Three outputs send out a square wave and the other three a sine wave.
All outputs are active simultaneously and can be connected to multiple devices.  It is an upgrade for high end systems.

 Some features:

• CNC Aluminium Chassis
• AC Noise Filter
• High quality components like: toroidal transformer, Phillips 1% Precision Resistors, High Endurance reservoir Caps
• OCXO clock (Over Controller Crystal Oscillator) with ultra low noise PLL circuitry

Specifications:

• Ports: 6 x BNC (3 x square wave, 3 x Sine wave)
• Output Frequency: 10MHz
• Frequency Accuracy: < 300ppb
• Frequency Stability: < 50ppb
• Output level: >= 7dBm @ 50Rz
• Output Impedance: user configurable (50 or 75 Ohms)
• Phase Noise @ 1Hz: -115dBc
• Size (W*H*D): 240mm * 59mm * 175mm
• Weight: 2.5kg

The OCK-1  is a 10MHz Master Clock Generator equipped with OCXO (Oven Controlled Crystal Oscillator) powered by Ultra-Low-Noise Linear Power Supply.

It is highly precise, accurate and far superior compared to traditional SPXO Femto Clocks. Output Freq is 10.000000MHz.
It is equiped with three(3) sets of Buffered Clock Outputs at the rear panel. One output sends out a square wave and the other two a sine wave.
All outputs are active simultaneously and can be connected to multiple devices.  It is an upgrade for high end systems.

 Some features:

• CNC Aluminium Chassis
• AC Noise Filter
• High quality components like: toroidal transformer, Phillips 1% Precision Resistors, High Endurance reservoir Caps
• OCXO clock (Over Controller Crystal Oscillator) with ultra low noise PLL circuitry

Specifications:

• Ports: 3 x BNC (1 x square wave, 2 x Sine wave)
• Output Frequency: 10MHz
• Frequency Accuracy: < 300ppb
• Frequency Stability: < 50ppb
• Output level: >= 7dBm @ 50Rz
• Output Impedance: 50 Ohms
• Phase Noise @ 1Hz: -110dBc
• Size (W*H*D): 130mm * 65mm * 270mm
• Weight: 2.7kg

The BATT-1  is an Ultra-Low-Noise, Battery Powered DC5V/1.5A Linear Power Supply (LPS) for critical and sensitive audio equipment.

Clean power is the foundation of good sound quality - Audio enthusiasts know that. The BATT-1  is able to deliver ultra clean 5 DC Volt at a maximum of 1.5 Ampere. At full charge, the LPS is capable to power up the load continuously for 4 Hours. It can also be charged and output its clean 5 Volts simultaneously.

 Some features:

• CNC Aluminium Chassis
• Linear Technology LT3042+PNP High Performance Regulator
• Four(4) large Panasonic made 3200mAH High Capacity Lithium-ion Batteries
• Lab Measured Output Noise < 1 uVrms
• List of compatible devices: LHY Audio UBT-1, SMSL Sanskrit 10 DAC, Grace Design m900 DAC, Chromecast, etc

Specifications:

• Charger: DC9-12V
• Output Voltage: 5 Volt DC
• Output Current: 1.5A max (4hrs)
• Output ports: 1 x USB, 1 x DC5521
• Size (W*H*D): 100mm * 47mm * 155mm
• Weight: 0.65kg

An Audio or Video device is only as good as its power supply. Therefore upgrading the power supply with a better one will result in a better sound and image quality.

The LHY Audio Linear Power Supplies offer a big improvement over the default (switching) power supplies. The power delivery is very clean and there is also no pollution send into devices powered via the same power distributor. Bring your loved device and sound/video quality to the next level!

The circuit design of the LPS25VA is referenced and improved of the well-known Walt Jung Super Reg. The performance is first in its class. Output voltage stays VERY stable with 0.01VDC tolerance at all loads.

Some features of the LPS25VA

• AC Incoming: Schurter IEC, Japan Made EDK Switch
• AC Noise Filter: UK RIFA RFI Suppression Caps & Noise Filter     
• AC Transformer: Nuvotem Talema Encapsulated 25VA w/ Fast Acting Fuse Protection
• High Speed Rectifier with RIFA 0.1uf Bypass Caps
• Phillips BC 2200uf/25v x 4 Reservoir Caps, total of 8800uf !
• Phillips 1% Precision Resistors
• Panasonic FC 120uf, 390uf Decoupling Caps
• Mexico Made Inductors
• Analog Device OP177 for Voltage Error Feedback Compensation
• Toshiba Pass Power Transistor
• Two Simultaneously Driven Voltage Output Jacks  
• Mexico Made Multi-turns Variable Resistor for Fine Voltage Output Adjustment  
• Integrated Aluminum Heat-sink chassis, with 5mm thick (very) well designed front panel with Laser Marked texts

What’s in the package:

1. The LPS25VA itself with thick foam package
2. 0.8m long of DC5.5 - 2.1 mm cable x 1pcs

An Audio or Video device is only as good as its power supply. Therefore upgrading the power supply with a better one will result in a better sound and image quality.

The LHY Audio Linear Power Supplies offer a big improvement over the default (switching) power supplies. The power delivery is very clean and there is also no pollution send into devices powered via the same power distributor. Bring your loved device and sound/video quality to the next level!

The LPS50VA further improves the popular LPS25VA, bringing even better performance along with higher power rating. Let's feed the clean DC power to your audiophile equipment!

Some features of the LPS50VA

• AC Incoming: Schurter IEC, Japan Made EDK Switch
• AC Noise Filter: UK RIFA RFI Suppression Caps & Noise Filter     
• AC Transformer: UK Noratel Encapsulated 50VA w/ Fast Acting Fuse Protection
• High Speed Rectifier with RIFA 0.1uf Bypass Caps
• Rubycon Reservoir Caps!
• Phillips 1% Precision Resistors
• Panasonic FC  Decoupling Caps
• Mexico Made Inductors
• Analog Device OP177 for Voltage Error Feedback Compensation
• Toshiba Pass Power Transistor
• Single Voltage Output Jack 
• Mexico Made Multi-turns Variable Resistor for Fine Voltage Output Adjustment  
• Integrated Aluminum Heat-sink chassis, with 5mm thick (very) well designed front panel with Laser Marked texts

What’s in the package:

1. The LPS50VA itself with thick foam package
2. 0.8m long of DC5.5 - 2.1 mm cable x 1pcs

An Audio or Video device is only as good as its power supply. Therefore upgrading the power supply with a better one will result in a better sound and image quality.

The LHY Audio Linear Power Supplies offer a big improvement over the default (switching) power supplies. The power delivery is very clean and there is also no pollution send into devices powered via the same power distributor. Bring your loved device and sound/video quality to the next level!

The LPS80VA further improves the popular LPS25VA, bringing even better performance along with higher power rating. Let's feed the clean DC power to your audiophile equipment!

Some features of the LPS80VA

• AC Incoming: Schurter IEC, Japan Made EDK Switch
• AC Noise Filter: UK RIFA RFI Suppression Caps & Noise Filter     
• AC Transformer: UK Noratel Encapsulated 80VA w/ Fast Acting Fuse Protection
• High Speed Rectifier with RIFA 0.1uf Bypass Caps
• Rubycon Reservoir Caps!
• Phillips 1% Precision Resistors
• Panasonic FC  Decoupling Caps
• Mexico Made Inductors
• Analog Device OP177 for Voltage Error Feedback Compensation
• Toshiba Pass Power Transistor
• Two Simultaneously Driven Voltage Output Jacks  
• Mexico Made Multi-turns Variable Resistor for Fine Voltage Output Adjustment  
• Integrated Aluminum Heat-sink chassis, with 5mm thick (very) well designed front panel with Laser Marked texts

What’s in the package:

1. The LPS80VA itself with thick foam package
2. 0.8m long of DC5.5 - 2.1 mm cable x 1pcs

An Audio or Video device is only as good as its power supply. Therefore upgrading the power supply with a better one will result in a better sound and image quality.

The LHY Audio Linear Power Supplies offer a big improvement over the default (switching) power supplies. The power delivery is very clean and there is also no pollution send into devices powered via the same power distributor. Bring your loved device and sound/video quality to the next level!

The LPS160VA further improves the popular LPS25VA, bringing even better performance along with higher power rating. Let's feed the clean DC power to your audiophile equipment!

Some features of the LPS160VA

• AC Incoming: Schurter IEC, Japan Made EDK Switch
• AC Noise Filter: UK RIFA RFI Suppression Caps & Noise Filter     
• AC Transformer: UK Noratel Encapsulated 160VA w/ Fast Acting Fuse Protection
• High Speed Rectifier with RIFA 0.1uf Bypass Caps
• Rubycon Reservoir Caps!
• Phillips 1% Precision Resistors
• Panasonic FC  Decoupling Caps
• Mexico Made Inductors
• Analog Device OP177 for Voltage Error Feedback Compensation
• Toshiba Pass Power Transistor
• Two Simultaneously Driven Voltage Output Jacks  
• Mexico Made Multi-turns Variable Resistor for Fine Voltage Output Adjustment  
• Integrated Aluminum Heat-sink chassis, with 5mm thick (very) well designed front panel with Laser Marked texts
• Size (W*H*D): 140mm * 90mm * 260mm
• Weight: 4.5kg

What’s in the package:

1. The LPS160VA itself with thick foam package
2. 0.8m long of DC5.5 - 2.1 mm cable x 1pcs